Blog - Page 3 of 4 - Boiler Repairs in London, Boilers Repair Service London, Boiler Engineers London, Gas Safe Registered Engineers London

Boiler repair London
January 7, 2015 admin Comment

Boiler Repair London at your serviceWe are experienced, qualified heating technicians to carry out boiler replacements and new boiler installation in London. We at Boiler Repairs London have engineers who are fully accredited and trained by the main major gas boiler manufacturers. Boiler Repair London engineers are very much experienced

You will need the boiler in winters
November 24, 2014 admin Comment

With the extreme cold in winters of London, every household requires a boiler for obtaining hot water. The water pressure controller is connected with the boiler and the boiler extracts water from this device. When the tank of the boiler is filled with water, it turns on the flame underneath

How To Avoid Costly Boiler Repairs
October 17, 2014 admin Comment

If you have a boiler in the house, then you must realize the importance of taking care of this boiler system. If you dont want to call plumbers for Boiler Repairs London and waste money in the costly repairs it is important that you maintain the boiler for regular basis.

Corrosion Protection
September 14, 2014 admin Comment

Fresh Water is highly corrosive and there are not too many materials that will not succumb to it, in time. This is very damaging to surface metals in a water heater, boiler or storage tank. These components are quite costly and can be difficult to replace. So things calle anodes

New Waste Fitting
July 26, 2014 admin Comment

It is recommended that the waste fittings are fitted before the hand basin is installed in its final location if possible, as this will stop the need to work in what can sometimes be a very restricted space. London Boiler Repair professionals can supply and fit all types of appliances.

Softening and Purifying your Water
July 1, 2014 admin Comment

Water delivered from the main supply contains chlorine and various other dissolved minerals. There are also trace of metals, nitrates, insecticides and herbicides, although the amounts are controlled by regulations. There are several methods by which water may be treated to remove the chlorine minerals and contaminants. A London Boiler

Waste Fitting
May 5, 2014 admin Comment

With the old basin fitting removed:If this is for a basin, then, there will be no requirement to have an overflow connection because it is a part of the appliance as standard. Usually the waste fitting is set into the basin using washers made of rubber, however you could make

Water Heater Savings
May 4, 2014 admin Comment

The heaters that are fitted in the home need to work 24/7 in order to provide the hot water required for our needs. As we demand this water at a moments notice, this will unfortunately mean that a lot of energy is required to heat and keep this large volume

Speed-Type Fitting
May 3, 2014 admin Comment

To disconnect this type of fitting, first unlock it by turning the screw cap anticlockwise. You should then be able to see a gap and feel some resistance. Where clips have been fitted, they will need removing. Having done that you now press down on the collet which is on

Pump and Valve Tips
May 1, 2014 admin Comment

Jammed Rotor:Pump motors can occasionally stick and not run, (this does not mean that the pump needs replacing) and although there may be a slight vibration at the casing, this doesnt mean there is any rotation. Most of these pump motors will have an adjustable cover allowing access to the

1 234