Call NOW 020 3519 0554No Call-Out Fee

Waste Fitting

With the old basin fitting removed:If this is for a basin, then, there will be no requirement to have an overflow connection because it is a part of the appliance as standard. Usually the waste fitting is set into the basin using washers made of rubber, however you could make

Water Heater Savings

The heaters that are fitted in the home need to work 24/7 in order to provide the hot water required for our needs. As we demand this water at a moments notice, this will unfortunately mean that a lot of energy is required to heat and keep this large volume

Speed-Type Fitting

To disconnect this type of fitting, first unlock it by turning the screw cap anticlockwise. You should then be able to see a gap and feel some resistance. Where clips have been fitted, they will need removing. Having done that you now press down on the collet which is on

Pump and Valve Tips

Jammed Rotor:Pump motors can occasionally stick and not run, (this does not mean that the pump needs replacing) and although there may be a slight vibration at the casing, this doesnt mean there is any rotation. Most of these pump motors will have an adjustable cover allowing access to the