It happens to every homeowner when he flushes the toilet system, take a shower, and run water in the sink the water instead of go away, backs up, its mean you have a clogged drain. Knowing you can fix the problem by yourself it may help the homeowner to save the cost of plumber. On the other hand, ignoring the problem can escalate it and cause for a more expensive mend in the end.
when a fixture toilet, tub, or sink drains slowly or will not drains properly; it means there is a blockage somewhere in your plumbing network. When it is only one fixture, homeowner can removed or can repair it by using a hand auger or a plunger.
Multiple Clogged Drains
if the drain obstruction is happening more than one location, the trouble could be in the drain between the main line, and the fixture. After finding the line, homeowner might be unclogging it himself by using a plunger or hand auger.
Our company Boiler Repairs London mentions some preventive measure that can help homeowner.
Baking Soda and Vinegar
This technique will not work on toughest clogs. However, if homeowner have minor nature blockage then it is definitely works. It is an effective and safe technique.
Pour a cup of boil water down the drain remember to pour it slowly, leave one cup of the boiled water in the pot for later.
Immediately swamp 1/3 cup of baking soda.
In the pot, mix a cup hot water and vinegar. Pour this mixture down the drain. Let it sit for at least 15 minutes. You will hear whizz sounds.
Flush the mixture of vinegar with an additional cup of boiling water.
If you feel any difficulty kindly, contact our company at Boiler Repair London.